Aiguilleur HD Panasonic AG-HMX100

200.00 $

8 Entrées; HD-SDI(4), HDMI(2), DVI(2), Composite SD(1)

2 Sorties Program Out; HD-SDI(1) et DVI(1)

2 Sorties Preview Out Multi-View; HD-SDI(1) et DVI(1)

Description

Panasonic AG-HMX100 Specs

Video Input
System FormatHD:
1080/23.98PsF (for 3D only), 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
SD:
480/59.94i, 576/50i

Mixed operation of different video formats is not possible

Signal Processing4:2:2:4, 12 bit internal
Sampling Frequency48 kHz
Quantization16 bit for HDMI input
24 bit for SDI input
20 bit for analog input
Dynamic RangeMore than 90 dB at 1 kHz (digital)
More than 85 dB at 1 kHz (analog)
THDLess than 0.05 % at 1 kHz (digital)
Less than 0.08 % at 1 kHz (analog)
Cross TalkLess than -80 dB at 1 kHz, between any two channels (digital)
Less than -70 dB at 1 kHz, between any two channels (analog)
Headroom20 dB and 18 dB switchable
Analog Composite Input2x BNC, 1.0 V [p-p], 75ohm termination
SDI Input4x BNC:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards
HDMI2x HDMI type A
Reference Input2x BNC with loop-through, 1.0 V [p-p], 75ohm auto termination
Composite signal NTSC/PAL
Program (PGM) output1x SDI on BNC:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards

1x DVI-D, TMDS single link

Preview (PVW) Output1x SDI on BNC:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards
Aux1x SDI on BNC
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards
Multi-viewer1x SDI on BNC:
SD serial digital signal SMPTE259M-C and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M standards

1 DVI-D, TMDS single link

Additional PortsTALLY: D-sub 9-pin, Open-Collector (8 ch)
Maximum current: Less than 50 mA
Maximum voltage: 35 VDC
GPI: 1x BNC, make-contact
RS-232C: 1x D-sub 9-pin
Audio Input
Advanced Reference Output1x BNC, 75ohm
Composite signal sync: 0.286 V [p-p] NTSC /0.3 V [p-p] PAL
Burst: 0.286 V [p-p] NTSC /0.3 V [p-p] PAL
Audio Input4x XLR (L and R), 4/0/-3 dBm switchable, balanced, 10k

4x SDI on BNC embedded audio:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards

2x HDMI type A embedded audio

AUX Input1-pin jack (L and R), -10 dBv, High impedance, unbalanced
Microphone Input1 M6, -60 dBV, 2k, monaural, unbalanced
Program (PGM) output1x XLR (L and R), 4/0/-3 dBu switchable, low impedance, balanced

1x SDI on BNC embedded audio:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards

1-pin jack (L and R), -10 dBV, low impedance, unbalanced

Preview (PVW) Output1x SDI on BNC embedded audio:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards
Aux1x SDI on BNC embedded audio:
SD serial digital signal SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal SMPTE292M/296M/299M standards
Headphones1 M6, 8ohm, stereo, unbalanced, –infinity to –20 dBu
Power & Other Parameters
Power Supply100-230 VAC 50/60 HZ
Power Consumption60 W
Operating Temperature41 to 104 °F (5 to 40°C)
Operating Humidity10 to 80 % (no condensation)
Storage Temperature-4 to 140 °F (-20 to 60 °C)
Storage Humidity10 to 80 % (no condensation)
Dimensions16.75 x 7.75 x 15.75″ (42.4 x 19.7 x 40 cm)
Weight17.4 lbs (7.9 kg)